Order number: 02.60.66.003
Automatic Touchless Basin Faucet WBS-2.2A.2-100
The automatic touchless washbasin faucet WBS-2.2A.2-100 is a pedestal washbasin faucet with integrated electronics and an electromagnetic valve located directly in the faucet body. The two-hose version is equipped with an available mixer that allows manual adjustment of the desired water temperature.
The device is equipped with an optoelectronic sensor that detects the presence of hands or other objects in the sink area without contact and automatically starts the water flow after detecting them. The water flow is turned off 1-2 seconds after leaving the sensing zone.
The detection range is set automatically after connection and can be adjusted later along with other operating parameters using the remote control. If an object is in the detection zone continuously for more than 1 minute, the faucet will automatically close the water supply for safety reasons.
The faucet allows for the setting of both thermal and automatic hygienic flushing, contributing to a higher hygiene standard and preventing water stagnation. The device also automatically archives operating statistics, which can be used for monitoring and optimizing operations.
Key Parameters
- Control typeContactless – optoelectronic sensor (Long sensing range)
- Battery dimensions133 × 52 × 110 mm (height × diameter × spout length)
- Water connection2x G 3/8"
- Power supply6 V DC lithium battery CR-P2 or external power supply 230 V AC / 6 V DC depending on the variant
- Water flow6 l/min (aerator with flow regulator)
- Working pressure0.5 – 10 bar
- Recommended pressure1 – 5 bar
- Maximum cold water temperature25 °C
- Maximum hot water temperature70°C
- Sensing range Automatic setting after power on, max. 24 cm
- Operational statisticsValve cycle counter, water flow time, system and hygiene data
- Parameter settingRemote Control DO-5.1
Special Features
Automatic hygienic flush
Thermal Disinfection
STOP function
Automatic valve shutdown in case of power failure
info@senzor.sk